Product ID:L-605 IMPLANT QUALITY
MSDS Date:11/01/1985
FSC:3439
NIIN:01-097-5989
Kit Part:Y
MSDS Number: BTSRV

CARPENTER TECHNOLOGY CORP

READING, PA 19612-4662
US

Emergency Phone: 215-371-2000

Info Phone: 215-371-2000

Cage: 71321

U.S. SMALL BUSINESS ADMINISTRATION

14662 READING, PA 19612-4662 US

Telephone: 610-208-2134 / 610-208-2457/2457

Cage: 3S077

COBALT (SARA III)

CAS: 7440-48-4

RTECS: GF8750000

Fraction By Weight: 50.5%

OSHA PEL 0.1 MG/M3

ACGIH TLV: 0.05 MG/M3;DUST 9394

CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 20.0%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9394

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

TUNGSTEN

CAS: 7440-33-7

RTECS: YO7175000

Fraction By Weight: 15.0%

OSHA PEL NOE ESTABLISHED

ACGIH TLV: 1 MG/M3/3 STEL;9394

NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 10.0%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9394

IRON OXIDE FUME

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: 3.0%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5MG/M3(FE)FUME,B2;94

MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 1.5%

OSHA PEL C 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9394

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SPECIALTY STEEL ALLOYS ARE GENERALLY
NOT CONSIDERED HAZARDOUS AS SHIPPED.
CUTTING,WELDING,GRINDING,MELTING OR OTHER PROCESSES MAY GENERATE A
HAZARDOUS DUST OR FUME. MFR LISTED SIGNS/SYMPTOMS FOR EACH
INGREDIENT IN THE ALLOY SEPARATELY. HMIS COMPILED THESE IN THE
SIGNS/SYMPTOMS FIELD. SEE CARCINOGENICITY FOR CHRONIC.
Explanation of Carcinogenicity:CHROMIUM AND NICKEL AND/OR THEIR
COMPOUNDS ARE LISTED AS CARCINOGENS BY NTP & IARC. SEE INDIVIDUAL
REPORTS FOR DETAILS.
Effects of Overexposure:METAL FUME FEVER AND RESPIRATORY IRRITATION.
ALLERGIC SKIN OR RESPIRATORY REACTION. LUNG DAMAGE WHICH MAY NOT BE
REVERSABLE. LESS LIKELY ARE BLOOD, KIDNEY AND CNS EFFECTS.
Medical Cond Aggravated by Exposure:NO INFORMATION GIVEN BY MFR ON
MSDS.

First Aid:INHALED:MOVE PERSON TO FRESH AIR UNTIL RECOVERED, CONSULT A
PHYSICIAN. SKIN:WASH WITH WATER AND MILD DETERGENT, CONSULT A
PHYSICIAN. EYE:FLUSH THOROUGHLY WITH WATER FOR AT LEAST 15 MIN,
CONSULT A PHYS ICIAN. INGESTED:WHILE INGESTION OF LARGE ENOUGH
QUANTITIES TO CAUSE HEALTH EFFECTS IS UNLIKELY, CONSULT A PHYSICIAN
IF IT OCCURS.

Flash Point:NONE
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:HMIS:PRODUCT IS NON FLAMMABLE. EXTINGUISH FIRE
WITH MEDIA APPROPRIATE FOR SOURCE OF FIRE.
Fire Fighting Procedures:NO INFORMATION GIVEN BY MFR ON MSDS.
Unusual Fire/Explosion Hazard:UNLESS OTHERWISE NOTED, NONE. PRODUCT IS
A SOLID METAL.

Spill Release Procedures:PRODUCT IS A SOLID METAL AS SHIPPED. NO
POTENTIAL FOR SPILL OR LEAK.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NO INFORMATION GIVEN BY MFR ON MSDS.
HMIS:NORMAL STORAGE FOR STEEL STOCKS.
Other Precautions:NONE

Respiratory Protection:IF YOUR PROCESS CAUSES A RELEASE OF DUST OR FUME
IN EXCESS OF THE PERMISSIBLE EXPOSURE LIMIT, NIOSH APPROVED
RESPIRATORS FOR PROTECTION AGAINST AIRBORNE DUST OR FUMES SHOULD BE
WORN. RESPIRATORS SHOUL D BE USED I/A/W 29CFR1910.134.
Ventilation:IF YOUR PROCESS CAUSES A RELEASE OF DUST/FUME, USE LOC &
GEN EXHST VENT TO KEEP AIRBORNE CONC OF DUST/FUMES BELOW TLV.
Protective Gloves:GLOVES &/OR BARRIER CREAMS MAY BE NEEDED
Eye Protection:SAFETY GLASSES OR GOGGLES
Other Protective Equipment:HAND PROTECTION MAY BE NECESSARY TO PREVENT
SKIN SENSITIZATION & DERMATITIS. USE EYE PROTECTION IF PROCESS
WARRENTS.
Work Hygienic Practices:MFR: ? HMIS:USE GOOD INDUSTRIAL HYGIENE
PRACTICE. AVOID UNNECESSARY EXPOSURE. WASH THOROUGHLY BEFORE EATING
OR DRINKING
Supplemental Safety and Health
NONE

HCC:N1
NRC/State Lic Num:NONE
Boiling Pt:B.P. Text:HIGH
Melt/Freeze Pt:M.P/F.P Text:>2400F,>131
Vapor Pres:NIL
Vapor Density:NIL
Spec Gravity:7.5-8.5
Solubility in Water:INSOLUBLE
Appearance and Odor:SOLID, ODORLESS METAL.

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NO INFORMATION GIVEN BY MFR ON MSDS.
Hazardous Decomposition Products:NO INFORMATION GIVEN BY MFR ON MSDS.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:NO INFORMATION GIVEN BY MFR ON MSDS.
HMIS:DISPOSE I/A/W FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.